Quality & Certifications
Quality Philosophy
Every component we manufacture is treated as a safety-critical part. Quality is defined by material integrity, dimensional accuracy, and verified load performance — controlled at every stage from raw material to final inspection, to EN, BS, AS, and IS standards.
Our objective is simple: consistent performance under load, across every batch and every site.
Standards & Compliance
Scaffolding Product Standards (Primary)
- EN 74-1:2022 – Scaffolding couplers (right angle, swivel, sleeve, parallel)
- BS 1139 – Metal scaffolding components
- AS 1576.2 / AS/NZS – Scaffolding couplers and accessories (Australia)
- DIN EN 1065 – Adjustable steel props (Class D)
- EN 12810 / EN 12811 – System scaffolding and performance requirements (load validation reference)
Raw Material & Structural Steel Standards
- EN 39 – Steel tubes for scaffolding
- EN 10219 – Cold-formed welded structural hollow sections
- ASTM A500 – Structural steel tubing
- ASTM A36 – Carbon structural steel
Forging, Die & Tooling Standards
- DIN EN 10243-1 – Steel die forgings (tolerances and dimensions)
- IS 3469 (Part 1–3) – Steel die forgings
- ASTM A105 / ASTM A350 – Carbon steel forgings (where applicable)
These standards govern forging accuracy, grain flow, and dimensional consistency.
Welding & Fabrication Standards
- ISO 3834 – Quality requirements for fusion welding
- EN 1090 – Execution of steel structures (process reference)
Surface Protection & Coating Standards
- ISO 1461 – Hot-dip galvanized coatings
- ISO 10140 / ISO 1015 (as applicable) – Paint and coating testing
Quality Management Systems
- ISO 9001:2015 – Quality Management
- ISO 14001:2015 – Environmental Management
- ISO 45001:2018 – Occupational Health & Safety
Certifications
Certified under ISO 9001:2015, ISO 14001, ISO 45001 | BIS licensed manufacturer | ZED certified by Ministry of MSME, Government of India
Testing & Validation
Material Testing
- Chemical composition (Spectro analysis)
- Tensile strength, yield strength, elongation Standards: BS 1139, EN 39, EN 10219, ASTM A500, ASTM A36
In-Process Quality Control
- Raw Material Verification
- Forging Control
- Dimensional Inspection
- Assembly & Fitment Check
- Load & Performance Validation
- Batch Traceability & Dispatch
Mechanical & Functional Tests
- Load capacity testing
- Shear strength testing
- Bending tests
- Hardness tests
- Standards: EN 74-1, BS 1139, AS 1576, EN 1065
System & Structural Performance
- Ultimate load capacity tests
- Structural behaviour under working load
- Standards: EN 12810, EN 12811
Welding Validation (Where Applicable)
- Weld penetration testing
- Joint integrity inspection
- Standards: ISO 3834, EN 1090
Surface Protection Testing
- Zinc coating thickness
- Adhesion and surface continuity
- Standards: ISO 1461
Traceability & Documentation
All scaffolding components are supported by batch-wise traceability and controlled documentation.
Heat-wise raw material traceability
Batch identification through forging, fabrication, and finishing
Inspection and test records linked to each batch
Mechanical, dimensional, and coating test reports maintained
Welding records retained where applicable
Pre-Dispatch / Final Inspection (PDI) completed before shipment
Documentation controlled under ISO 9001 QMS and Records available for audits and customer review